Installation Tools

Pliers, applicators, dispensers and automatic assembly tools specifcally designed for aiding in the installation of Rotor Clip retaining rings.

Standard Retaining Ring Pliers
Rotor Clip Standard Retaining Ring Pliers are made of high carbon, heat treated steel and produced to exacting QC specifications. They feature stop and return springs
for problem-free installation/removal of retaining rings. This eliminates
overspreading of external retaining rings, and speeds the assembly / removal of internal retaining rings by orienting plier to exact location of lug holes. And Rotor Clip retaining ring pliers have exclusive air-cushioned handles.

Size Range:

Ratchet Retaining Ring Pliers
Assemble large retaining rings up to 10” in diameter with ease and comfort
using Rotor Clip Ratchet Pliers. Spring loaded mechanisms compress or expand large rings through gradual “steps.” Plier locks at the desired size
without continued pressure on the handles.
(Note: Ratchet Pliers do not include plier tips, which must be purchased
separately.)

Size Range:

Convertible Retaining Ring Pliers
Convert quickly and easily from internal to external pliers and back again.This two-in-one capablility is cost effective and ideal for handling a variety of applications with a minimum number of tools. Simply move the screw to the other hole and tighten with finger pressure to convert quickly to an internal/external plier.

Size Range:

Egonomic Retaining Ring Pliers
Rotor Clip ergonomic retaining ring pliers provide the following features:
•LONGER GRIPS - Spread forces across the handle for comfort and ease of use.
•CURVED HANDLE - Delivers 30% more force as the same effort applied
to a standard plier.
•STOP - Can be set to prevent overspreading of external (shaft) retaining rings; can be set to line up with lug holes of internal (housing)
rings for fast, smooth installation.
•AIR CUSHIONED HANDLES - “Give” during use for comfort and ease of use..

Size Range:

Applicators
Applicators are designed to install standard radial retaining rings on a
shaft. Used with Rotor Clip Dispensers, applicators enable operators to install rings quickly and correctly (ring “snaps” when properly
seated in groove.)

Size Range:

Dispensers
Rotor Clip retaining ring dispensers feature “rail” over which a stack of retaining rings can be slipped. Once in position, they can be “dispensed” one at a time using a retaining ring applicator for ease of installation.

Size Range: