Style 154 FDA
PTFE packing, interlock braid with a break-in lubricant.Food Grade FDA PTFE filaments and break-in lubricant.

Construction: Interlock Braid
Temp: to 500°F (260°C)
pH: 0 - 14
Pressure: to 300 psi (pump service)
Speed: 1500 FPM

Style 165
Graphite filled PTFE fibre packing that improves thermal conductivity and will not harden. Commonly called GFO

Construction: Interlock Braid
Temp: to 550°F (285°C)
pH: 0 - 14
Pressure: to 300 psi
Speed: 4300 FPM

Style 170
Aramid fibre packing with an inert lubricant. Extremely durable, highly abrasive resistant packing. Ideal for slurry service.

Construction: Interlock Braid
Temp: to 500°F (260°C)
pH: 3 - 11
Pressure: to 300 psi
Speed: 1900 FPM

Style 528
Flax fibre packing, lubricated with tallow and wax. Used for brine, cold water and oil service. Ideal for marine applications.

Construction: Square Braid
Temp: to 200°F (105°C)
pH: 5 - 9
Pressure: to 150 psi
Speed: 1200 FPM.

Style 1152
Special syntex fibre, each strand impregnated with PTFE dispersion both prior to and after braiding. Finished packing also has a break-in lubricant. An asbestos replacement packing for general service applications. Good chemical resistance.

Construction: Interlock Braid
Temp: to 500°F (260°C)
pH: 0 - 12
Pressure: to 500 psi
Speed: 2200 FPM.

Style 1398
Syntex fibre packing impregnated with a high temperature lubricant. Finished packing is surface graphited. An asbestos replacement packing for general service use on pumps and valves.

Construction: Interlock Braid
Temp: to 500°F (260°C)
pH: 4 - 10
Pressure: to 300 psi
Speed: 1500 FPM.