Axially Assembled

Axial retaining rings are designed for axial installation into machined grooves.  These rings are either internal for installation in housings and bores, or external, for assembly on shafts.  Once installed, they provide a protrusion or "shoulder" for retaining parts.

HO - Internal Housing Ring
Once installed in the groove of a housing/bore, the portion of the ring protruding from the groove (also called a "shoulder") holds an assembly in place.

Size Range: .250 - 10.0 inches

SH - Exernal Shaft Ring
Once installed in the groove of a shaft, the portion of the ring protruding from the groove (also called a "shoulder") holds an assembly in place.

Size Range: .125 - 10.0 inches

HOI - Internal Housing Inverted Ring
Functions like an HO ring in a housing/bore, only the lugs are "reversed."  This version reduces the distance the lugs of the standard HO extend into the inner circumference of the housing/bore and allows for another assembly to pass through unimpeded.

Size Range: .625 - 2.5 inches

SHI - Exernal Shaft Inverted Ring
Functions like an SH ring on a shaft, only the lugs are "reversed."  This version reduces the distance the lugs of the standard SH extend beyond the circumference of the shaft.  The shaft can then be used in an application where clearance in minimal.

Size Range: .500 - 2.5 inches

SHR - Exernal Shaft Reinforced Ring
The SHR is an extra thick version of a regular SH retaining ring.  As such, it is stronger and can withstand greater thrust loads than its standard counterpart.

Size Range: .394 - 2.0 inches

SHM - Exernal Shaft Tamper-Proof Ring
The SHM also functions like an SH retaining ring, but in "smaller" applications.  It is also a tamper proof ring which does not have any lugs and can not be easily removed once installed.

Size Range: .101 - .375 inches